Table of Contents
Advertisement
User Tools Menu (Copier/Document
Server Features)
This section describes items that can be specified on the copier initial screen.
Copier initial screen can be displayed by pressing the {User Tools} key. For more
information about how to set up these items, see General Settings Guide.
❖ General Features
Item
Auto Image Density Prior-
ity
Original Orientation in
Duplex Mode
Copy Orientation in Du-
plex Mode
Reserve Job Mode
Reservation Screen Auto-
off Timer
Max. Copy Quantity
Manual Original Counter
Reset
Auto Tray Switching
Text
Text / Photo
6
Description
You can set whether Auto Image Density is "On" or "Off" when
the machine is turned on, reset, or modes are cleared.
You can set the original orientation when making two-sided copies.
You can set the copy orientation when making two-sided copies.
You can set whether to reset the mode to the initial state or return
to the mode in use before the reserved operation was started when
you return to the initial screen after reserved copying finishes.
You can set the time required until the display is switched to the
reserved first job display after reservation is set.
If you select "Switch", use the number keys to enter the time (10-99
seconds).
The default setting is 15 seconds.
The maximum copy quantity can be set between 1 and 9999. The
default setting is 9999 sheets.
You can set whether to enable the document counter reset key.
When the paper runs out during copying, it can be automatically
fed from a substitute paper feed tray, irrespective of the orientation
of paper in that tray – provided it is the same size as that set in the
other paper feed tray during automatic paper selection. This func-
tion is called "Auto Tray Switching". You can set whether to per-
form the Auto Tray Switching.
You can adjust the edge level of the finished image. The outline of
a character becomes soft when you select "Soft". The outline of a
character can be sharply copied when you select "Sharp".
You can select which has priority, photographs or characters,
when an original contains both.
If you select "Normal", character and photo quality is balanced in
the copy.
Advertisement
Table of Contents
