Mxw System Control Software - Shure Microflex Wireless User Manual

Software

MXW System Control Software

The MXW control software allows comprehensive system control and monitoring from a computer. It is hosted from an
embedded server in the MXW Access Point, and is accessible when properly networked to a computer. All hardware
functions can be adjusted using this software interface.
Log On Page
① User
There are three security levels to the Control Software:
Admin, Tech and Guest. By default, only Admin is enabled.
Log on and go to the Preferences tab to manage the User
log on.
Admin (default): Full editing rights. The Admin can
enable or disable a Tech-level logon.
Tech: Partial editing rights, limited to microphone
management on the Monitor tab.
Guest: Monitoring only.
Control Bar
① Tabs
• Monitor: Adjust microphone status and view RF spectrum
availability.
• Configuration: Form groups of components
• Utility: View details and manage IP settings of each MXW
device on the network
• Preferences: Assign microphone and system behavior
② Security Level
Displays the access level of the user: Administrator,
Technician, or Guest.
75
② Password
Enter the password to log on as an Admin or Tech.
The default password is 'admin' for the Admin user. To
change the password, log on as an Admin and go to the
Preferences tab.
③ Keep Me Logged On Button
When selected, this allows the user to bypass the Log On
page when reopening the control software.
④ Language Selection
Selects the language for the GUI. This setting will be saved
to the computer.
⑤ Log On Button
Press the button to log onto the control software.
Note: Default password is 'admin'
③ Log Off
Logs the user out of the software.
④ Shure Link
Links to the Shure website at www.shure.com.
⑤ Language Selection
Selects the language for the control software interface. This
setting will be saved to the computer.