Shure Microflex Wireless User Manual page 11

Overview
Forming Groups and Linking Microphones
Once all the MXW components are connected to the
network, they can be associated into Groups from the
Configuration tab of the control software. Each Access
Point can form an association Group with one or two
chargers (for Linking microphones) and one or two audio
output devices (for routing audio to analog outputs). The
microphones can then be placed in the charger and Linked
to these access point channels.
Group 1
Configurations: Managing Multiple Groups
Configurations allow multiple Groups to share the same
preferences and global controls. When an additional
Group is added to a Configuration page, a relationship is
established across all devices in the configuration. The new
Group will take on the settings of that configuration.
11
push to solo | hold to mute
3
Each Group is managed by a single access point.
Microphones are Linked to channels in the access point,
not to the charger that was used to Link them. This
relationship persists until the microphones are re-Linked or
the access point is reset.
1
2
3
1
2
1
For specialized applications such as multiple room setup,
several configurations can be created to independently
control component Groups.
Key
Digital audio and
control network
Channel link data
Analog audio output
Group 2
push to solo | hold to mute
Group 3
push to solo | hold to mute