Shure MXA-MUTE User Manual
  1. Manuals
  2. Brands
  3. Shure Manuals
  4. Microphone system
  5. MXA-MUTE
  6. User manual
Shure MXA-MUTE User Manual

Shure MXA-MUTE User Manual

Network mute button
Hide thumbs Also See for MXA-MUTE:
Table of Contents

Advertisement

Quick Links

Download this manual
MXA-MUTE
Network Mute Button
Shure MXA Network Mute Button user guide. Learn how to connect 1 or many PoE-powered mute buttons to Shure mics and processors to
control muting and unmuting.
Version: 1 (2020-E)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MXA-MUTE and is the answer not in the manual?

Questions and answers

Related Manuals for Shure MXA-MUTE

Summary of Contents for Shure MXA-MUTE

  • Page 1 MXA-MUTE Network Mute Button Shure MXA Network Mute Button user guide. Learn how to connect 1 or many PoE-powered mute buttons to Shure mics and processors to control muting and unmuting. Version: 1 (2020-E)

  • Page 2: Table Of Contents

    Compatible Devices What's in the Box Using a Third-Party Control System How the Network Mute Button Works Specifications Installing the Mute Button Important Product Information Power Over Ethernet (PoE) Information to the user Controlling Devices with Shure Designer Software 2/17...

  • Page 3: Mxa-Mutenetwork Mute Button

    Shure Incorporated MXA-MUTE Network Mute Button IMPORTANT SAFETY INSTRUCTIONS READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Allow sufficient distances for adequate ventilation and install in accordance with the manufacturer’s instructions.

  • Page 4: Mxa Network Mute Button Overview

    ® ™ Shure networked products, including Microflex Advance array microphones, IntelliMix P300, IntelliMix Room, and ANIUSB- MATRIX. One or many of the low­profile, touch­sensitive mute buttons can be configured to mute one or multiple MXA micro­ phones, depending on user needs or room configurations.

  • Page 5: Mxa Network Mute Button Parts

    Connect a Cat5e (or better) cable supplying Power over Ethernet (PoE) here. Reset button ◦ Network reset (press for 4-8 seconds): Resets all Shure control IP settings to factory defaults. ◦ Full factory reset (press for more than 8 seconds): Resets all network and configuration settings to the factory de­...

  • Page 6: What's In The Box

    The network mute button is a simple muting solution for rooms with no microphone on the table, for when the microphone has no mute button, or for when you need another way to control muting. Use Shure Designer software to link mute buttons to a compatible device.

  • Page 7: Installing The Mute Button

    Shure Incorporated Installing the Mute Button The mute button fits in tables that are between 0.31 and 2.05 inches (8 to 52 mm) thick. To get started, you will need: • Drill with 7/8 or 1 inch (22 or 25 mm) drill bit Drill a hole in the table.
  • Page 8 Shure Incorporated 8/17...
  • Page 9 Shure Incorporated Slide the grommet onto the tube so it's flush against the bottom of the table. ◦ 7/8 inch (22 mm) hole: Grommet pointing down ◦ 1 inch (25 mm) hole: Grommet pointing up Optional: Add 1 or more of the included spacers between the grommet and the base to help position the network port under the table.
  • Page 10 Shure Incorporated 5. Connect the 8-pin power cable to the power connector on the base. 10/17...

  • Page 11: Power Over Ethernet (Poe)

    PoE injector. Check that the mute button's light ring turns on after you plug in the Ethernet cable. To link the mute button to other devices and control other settings, open it in Shure Designer software. Power Over Ethernet (PoE) This device requires PoE to operate.

  • Page 12: Controlling Devices With Shure Designer Software

    A PoE injector device Controlling Devices with Shure Designer Software To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au­ dio coverage for installations using MXA microphones and other Shure networked devices.

  • Page 13: Light Ring

    Push-to-mute: Press and hold the button to mute the microphone. Linking Mute Buttons to a Device Use Designer to link one or more mute buttons to a device. When you link the mute button to Shure devices with IntelliMix DSP, the AEC stays converged to deliver the best performance.

  • Page 14: Compatible Devices

    Shure Incorporated One or more microphones connected to separate DSP (P300, IntelliMix Room, or ANIUSB-MATRIX): Link the mute buttons to the DSP. Microphone connected to third-party DSP: If using the microphone's IntelliMix output, link the mute button to the mi­...
  • Page 15 Shure Incorporated Power Requirements Power over Ethernet (PoE), Class 1 Power Consumption 2 W, maximum Weight 0.43 kg (0.95 lbs) Control Software Shure Designer Ingress Protection Rating IEC 60529 IPX1 Operating Temperature Range −6.7°C (20°F) to 40°C (104°F) Storage Temperature Range −29°C (­20°F) to 74°C (165°F)

  • Page 16: Important Product Information

    Note: This device is not intended to be connected directly to a public internet network. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment. Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC per­...
  • Page 17 This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com...

Table of Contents