Control Software For The Mxw Audio Network Interface - Shure Microflex Wireless User Manual

Software
Control Software for the MXW Audio
Network Interface
The MXW Audio Network Interface features a control software to mange the analog inputs and outputs of the MXW
system, in addition to the 4-port gigabit switch on the back panel of the network interface.
By default, all MXW devices have the password 'admin' applied to the control software. When logging in for the first time,
enter 'admin' into the field to log on as the administrator. The password can be changed from the Preferences tab.
Note: For optimal system performance, the control software should not be open to more than seven tabs or windows.
Log On Page
①
②
③
④
⑤
① User
There are three security levels to the Control Software:
Admin, Tech and Guest. By default, only Admin is enabled.
Log on and go to the Preferences tab to manage the User
log on.
83
Admin (default): Full editing rights. The Admin can
enable or disable a Tech-level logon.
Tech: Partial editing rights, limited to microphone
management on the Monitor tab.
Guest: Monitoring only.
② Password
Enter the password to log on as an Admin or Tech.
The default password is 'admin' for the Admin user. To
change the password, log on as an Admin and go to the
Preferences tab.
③ Keep Me Logged On Button
When selected, this allows the user to bypass the Log On
page when reopening the control software.
④ Language Selection
Selects the language for the GUI. This setting will be saved
to the computer.
⑤ Log On Button
Press the button to log onto the control software.
Note: Default password is 'admin'