Digital Signal Processing - Shure Microflex Wireless User Manual

Microflex Wireless Specifications

Digital Signal Processing

AD/DA Converter
24-bit, 48 kHz
Latency
Estimated Nominal, ±0.1 ms
Analog-to- 0.21 ms
Dante
Networking
Network Interface
Four-Port Gigabit Ethernet Switch, Dante digital audio
Uplink Port (Port 4)
Selectable, blocks multicast traffic
Power over Ethernet (PoE)
Provided on Port 1 to power MXWAPT
102
Dante-to- 0.24 ms + TN
Analog
TN = Network latency in milliseconds, as set in Dante
Controller.
Note: Dante network latency is typically associated with the
receiving device.
Cable Requirements
Cat 5e or higher, shielded, 100 m maximum between
network devices
Network Addressing Capability
DHCP, link-local, static