Mxw System Control Software; Log On Page; Control Bar - Shure MXW Series User Manual

Software

MXW System Control Software

The MXW control software allows comprehensive system control and monitoring from a computer. It is hosted from an embedded server in the MXW Access
Point, and is accessible when properly networked to a computer. All hardware functions can be adjusted using this software interface.
①
②
③
④
⑤
②

Control Bar

① Tabs
• Monitor: Adjust microphone status and view RF spectrum availability.
• Configuration: Manage groups and IP settings
• Utility: View details of each MXW device on the network
• Preferences: Assign microphone and system behavior
② Security Level
Displays the access level of the user: Administrator, Technician, or
Guest.
39
①

Log On Page

① User
There are three security levels to the Control Software: Admin, Tech
and Guest. By default, only Admin is enabled. Log on and go to the
Preferences tab to manage the User log on.
Admin (default): Full editing rights. The Admin can enable or disable a
Tech-level logon.
Tech: Partial editing rights, limited to microphone management on the
Monitor tab.
Guest: Monitoring only.
② Password
Enter the password to log on as an Admin or Tech. The default
password is 'admin' for the Admin user. To change the password, log
on as an Admin and go to the Preferences tab.
③ Keep Me Logged On Button
When selected, this allows the user to bypass the Log On page when
reopening the control software.
④ Language Selection
Selects the language for the GUI. This setting will be saved to the
computer.
⑤ Log On Button
Press the button to log onto the control software.
Note: Default password is 'admin'
③
③ Log Off
Logs the user out of the software.
④ Shure Link
Links to the Shure website at www.shure.com.
⑤ Language Selection
Selects the language for the control software interface. This setting will
be saved to the computer.
④
⑤