Ip Ports And Protocols - Shure Microflex Wireless User Manual

Troubleshooting

IP Ports and Protocols

Shure Control
Port TCP/UDP
21 tcp
22 tcp
23 tcp
68 udp
80* tcp
427 tcp/udp
443 tcp
161 tcp
162 tcp
843* tcp
2202 tcp
5353 udp
5568 udp
8023 tcp
8180* tcp
8181* tcp
8427 udp
64000 tcp
Dante Audio & Controller
Port
162
[319-320]*
4321, 14336-14600
[4440, 4444, 4455]*
5353
[8700-8706, 8800]*
8751
16000-65536
*These ports must be open on the PC or control system to access the device through a firewall.
These protocols require multicast. Ensure multicast has been correctly configured for your network.
†
93
Protocol Description
FTP Required for firmware updates (otherwise closed)
SSH Not supported
Telnet Standard console interface
DHCP Dynamic Host Configuration Protocol
HTTP Required to launch embedded web server
SLP Required for inter-device communication
†
HTTPS Not supported
SNMP Not supported
SNMP Not supported
Flash Required for web application
ASCII Required for 3rd party control strings
mDNS Required for device discovery
†
SDT Required for inter-device communication
†
Telnet Debug console interface
Flash Required for web web application
Flash Required for web web application
Multcast SLP Required for inter-device communication
†
Telnet Required for Shure firmware update
TCP/UDP Protocol
udp SNMP
udp PTP
udp Dante
udp Dante
udp mDNS
udp Dante
udp Dante
udp Dante
Description
Used by Dante
Dante clocking
†
Dante audio
Dante audio routing
Used by Dante
†
Dante Control and Monitoring
Dante Controller
Used by Dante
Factory Default
Closed
Closed
Closed
Open
Open
Open
Closed
Closed
Closed
Open
Open
Open
Open
Password
Open
Open
Open
Open