Verifying Connectivity - Avaya g700 Installation And Upgrades

Configure Ethernet Interfaces screen
5. Fill in the correct server IP address, Gateway, and Subnet mask.
If these fields are already filled in, overwrite them with the correct information. Leave the
Integrated Messaging fields blank.
Click Change to update the system files.
Note:
If an Action Cancelled message appears before the success message, refresh
Note:
the screen and click Change again.
6. When the configuration change is complete, the screen displays Successfully configured
ethernet interfaces. Click Close Window.
At this point, the system resets the IP interfaces.

Verifying connectivity

To verify that the Ethernet port is working, ping the FTP server where the Linux-Migration
backup file is stored.
To verify connectivity
1. On the Maintenance Web Interface, under Diagnostics click Ping.
2. Enter the IP address where the Linux-Migration backup file is stored.
Upgrading the S8300A
Issue 8.1 June 2005 255