Checklist 5; Upgrade An Existing G700 Without An S8300 - Avaya g700 Installation And Upgrades

Media gateway and media server
Hide thumbs Also See for g700:
Table of Contents

Advertisement

Checklist 5:

Upgrade an Existing G700 without
an S8300
Use Checklist 5 to upgrade a G700 Media Gateway with the following characteristics:
The G700 does not have an S8300 and is controlled by an external S8300, S8500, or
S8700-series Media Server.
You will use Chapter 7 with this checklist. For help with connecting to and logging in to the
G700, see
About connection methods
Checklist 5: Task List to Upgrade an Existing G700 without an S8300
Major Tasks
Before going to the customer
site
on page 325
On-site preparation for the
upgrade
on page 328
Installing new firmware on the
G700 Media Gateway
page 331
on page 54.
Subtasks
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Install the Gateway Installation Wizard on laptop
- Download firmware files
- Verify contents of the tftp directory
- Determine which firmware to install
Using the Upgrade Tool:
on
- Install firmware on the P330 Stack Processor
- Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
-Set Rapid Spanning Tree
About the Installation Roadmap and Task Lists
Issue 8.1 June 2005
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

S8300

Table of Contents