Avaya g700 Installation And Upgrades page 96

Hardware installation for the G700 Media Gateway and S8300 Media Server
Figure 12: Insert Media Module
4. Apply firm pressure to engage the connectors.
The media module connector has different length pins. The long pins will engage first to
provide grounding. Medium length and short pins will provide power and signal.
5. Lock the media module into the chassis by tightening the spring-loaded captive screws on
the front of the module.
!
WARNING:
To prevent access to electrical hazards by unauthorized personnel and to ensure
WARNING:
continued compliance to international radiated emissions requirements, all
captive screws must be securely tightened such that they cannot be loosened
without the use of a tool.
!
WARNING:
After you have connected telephones to the various media modules, be sure to
WARNING:
add circuit protection to the lines (see
process
At this point, you have readied the G700, inserted the S8300, if required, and inserted the
media modules, as described in the planning documentation. Next, if required, the Expansion
Module should be inserted into its bay.
96 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
on page 360).
Complete the telephone installation