Assigning Node Names And Ip Addresses For The C-Lans And Lsps - Avaya g700 Installation And Upgrades

Manual installation of a new G700 with an S8300
This document covers only the administration of Communication Manager required for the
G700 media gateway to communicate with the primary controller over a customer's network.
For the majority of required administration, see Administrator Guide to Avaya Communication
Manager, 03-300509, or Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504.
In this section, you will use the SAT interface on the primary controller to:

Assigning Node Names and IP Addresses for the C-LANs and LSPs

●
Administering Network Regions
●
Assigning LSPs to the Network Regions
●
Administering IP Interfaces
●
Administering the LSP Form
●
Note:
For information on installing the CLAN boards on the S8500 or S8700 port
Note:
networks and complete information on installing an S8700 media server, see the
Installation documentation on the Documentation for Avaya Communication
Manager, Media Gateways and Servers CD, 03-300151.
Assigning Node Names and IP Addresses for the C-LANs and LSPs
Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
Note:
sure to check the firmware version for these boards on the S8700. For
information on how to upgrade the firmware on the S8700, please see the section
"Upgrade Firmware in Selected Port Cabinet Packs" in Upgrading the Avaya
media server Configuration in the S8700 documentation portion of this
documentation CD, ''Avaya S8300, S8500, and S8700 media server Library CD,"
555-233-325.''
To assign node names and IP addresses
1. At the SAT prompt, type change node-names ip to open the Node Names screen.
500 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server