Assigning Lsps To The Network Regions; Administering Ip Interfaces - Avaya g700 Installation And Upgrades

Installing a new G700 with an S8300

Assigning LSPs to the Network Regions

If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of
a network failure, IP telephones assigned to a network region will register with the LSPs
assigned to that region.
This procedure assigns up to six LSPs to a network region.
To assign LSPs to a network region
1. On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 2
change ip-network-region 1
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
2. Enter the names of up to six LSPs to be assigned to region 1.
The LSP names must be the same as administered on the Node Names form.
3. Submit the form.
4. Repeat for each network region to which you want to assign LSPs.

Administering IP Interfaces

To define the IP interfaces of the S8500 or S8700 port network CLAN boards
Note:
This should have already been established as a part of normal S8500 or S8700
Note:
installation.
1. Type change ip-interfaces to open the IP Interfaces screen.
170 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
IP Network Region
Page 2 of 19