Administering The Lsp Form - Avaya g700 Installation And Upgrades

IP Interfaces Screen
change ip-interfaces procr
Enable Ehternet Port?
Nework Region: 1
2. The field Enable Ethernet Port? should indicate y (yes). The Node Name should be the IP
address of the S8300 media server.

Administering the LSP Form

If the primary controller has LSPs, you must enter the LSP node names on the LSP form to
enable the LSPs to get translations updates from the primary controller. Once the LSPs are
successfully entered on the LSP screen, their status can be viewed with the display lsp
command.
Note:
The LSP node names must be administered on the node-names-ip form before
Note:
they can be entered on the LSP screen.
To add LSP names to the LSP screen
1. At the S8300 SAT prompt, type change lsp to open the LSP screen.
Type: PROCR
Node Name: procr
IP Address: 135.9.41.146
Subnet Mask: 255.255.255.0
Administer Communication Manager
IP INTERFACES
Page 1 of 1
Issue 8.1 June 2005 197