Verifying The Time, Date, And Time Zone; Verifying Media Server Configuration - Avaya g700 Installation And Upgrades

Upgrading an existing S8300A to R3.0 using the Wizards

Verifying the time, date, and time zone

To verify the time, date, and time zone
1. Under Server click Server Date/Time.
The Server Date/Time screen displays.
Server Date/Time screen
2. Verify or set the media server's time close enough to the NTS's time, date, and time zone
that synchronization can occur (within about 5 minutes).

Verifying media server configuration

Note:
If you upgraded from a pre-1.2 release, you should have already completed the
Note:
server configuration (see
Wizard
network
262 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
To configure the server using the Avaya Installation
on page 258. In this case, skip to
on page 269.
Setting rapid spanning tree on the