Avaya g700 Installation And Upgrades page 206

Installing a new G700 without an S8300
To enable announcements, if necessary
To save Communication Manager translations
To add a media gateway
1. At the SAT prompt, type add media-gateway <number>
where <number> is the gateway number from 1 to n. (n is 50 for an S8300 and 250 for an
S8500 or S8700).
The S8300 displays the Media Gateway screen.
Add media gateway Screen
add media-gateway 1
Serial No: 012X06230551
Network Region: 1
Registered? n
Slot
V1:
V2:
V3:
V4:
V8:
V9:
2. Complete the Name field with the hostname assigned to the G700 media gateway.
3. Complete the Identifier field with the serial number of the G700 media gateway.
You can obtain the serial number by typing the show system command at the MGP
command line interface.
!
CAUTION:
Be sure the serial number for the G700 media gateway you enter in this
CAUTION:
procedure matches exactly the serial number displayed in the show system
command. The serial number is case-sensitive, and if entered incorrectly, will
prevent the S8300 media server from communicating with the G700 media
gateway.
4. Complete the Network Region field with the value supplied in the planning documentation.
206 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
MEDIA GATEWAY
Number: 1
Type: g700
Name: Swainsons
Module Type
IP Address: 135.9.41.150
FW Version/HW Vintage: 21.13.0 /0
MAC Address:
Encrypt Link? y
Location: 1
Controller IP Address:
Site Data:
Name
Page 1 of 1