You an restrict access to management interfaces by IP address.
●
You can invoke a telnet client from the CLI.
●
Power over Ethernet (PoE)
PoE is supported on the C363T-PWR and C364T-PWR switches.
●
PoE is fully compliant with the 802.3af-2003 standard.
●
PoE provides up to 15.4W per port (on10/100 ports) over Ethernet cables to power IP
●
phones, wireless access points, and other end-points using 802.3af-2003 standards.
PoE automatically detects device connections and removal.
●
PoE automatic load detection does the following:
●
- Tests whether the device connected to the port requires remote powering.
- Controls the power injection to the wires.
Power is distributed between the 24/48 PoE ports according to priorities that you
●
configure. Power priority can be configured on each port. Distribution is calculated from
actual power consumption.
C460 converged multi-layer switch
For enterprises looking to deploy Avaya Communication Manager Communications
Applications, the Avaya C460 converged multi-layer switch is a highly resilient network platform
designed to provide high-availability support for mixed data and IP Telephony deployments.
The Avaya C460 features a compact modular six-slot chassis with the following main
characteristics:
Four I/O slots and two Supervisor slots
●
Fully redundant architecture (including switching fabric, supervisor modules and PSUs)
●
Power over Ethernet (PoE) support with the FE ports
●
High density - up to 192 FE PoE ports and 48 GE ports
●
Fabric switching throughput of 64Gbps at Layer 2 and 48Mpps routing at Layer 3
●
Policy and QoS mechanisms
●
Full router functionality
●
Wire-speed Layer 3 forwarding on all ports
●
Optimal use of physical chassis size (10U)
●
300W or 1000W (for PoE support) power supplies
●
Installation and wiring of telephones and power supplies
Issue 8.1 June 2005
355