1151B1 And 1151B2 Power Supplies; Important Safety Instructions For 1151B1 And 1151B2 Power Supplies - Avaya g700 Installation And Upgrades

Power requirements are consistent with the 1152A1 PDU voltage and power ratings.
●
Refer to Appendix B in the user's guide that comes with the unit for voltage and power
ratings.
To connect telephones and other end devices to the 1152A1 PDU
1. Connect an Ethernet cable to the telephone using an external splitter or directly (if the
device is Power over LAN Enabled).
2. Connect the opposite end of the same cable to the RJ45 wall outlet.
3. On the front panel of the 1152A1 PDU, monitor the response of the corresponding port LED.
If it lights up GREEN, the unit has identified your telephone as a Power over LAN telephone.

1151B1 and 1151B2 power supplies

The 1151B1 and 1151B2 power supplies are local power supplies. The telephones or consoles
connect directly to them through an RJ45 connector. The 1151B2 has a battery backup.
These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL 60950
third edition.
For safety instructions, see
supplies on page 347. For installation instructions, see
power supplies
Important safety instructions for 1151B1 and
1151B2 power supplies
Please read the following helpful tips. Retain these tips for later use.
When using this power supply, the following safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons:
Read and understand all instructions.
●
Follow all warnings and instructions marked on this power supply.
●
Table 20: 1151B1 and 1151B2
Power Supply UL 60950 Compliance
Complies
Certified
Approved
Approved
Important safety instructions for 1151B1 and 1151B2 power
on page 349.
Installation and wiring of telephones and power supplies
UL 60950
CSA 22.2
EN6950
CE
Connecting the 1151B1 or 1151B2
Issue 8.1 June 2005 347