Avaya g700 Installation And Upgrades page 168

Installing a new G700 with an S8300
The G700, in this case, may also share the same network region as the CLAN board(s).
However, it may have a different network region because of the geographic distances of the
connections between the G700 and the S8500 or S8700. The G700 network region may also
differ because of the nature of the endpoints connected to it.
To define IP network regions for the G700 and CLAN board(s)
!
CAUTION:
Defining IP network regions can be quite complex. For detailed information on
CAUTION:
the use and administration of IP network regions, see ''Administration for Network
Connectivity for Avaya Communication Manager, 555-233-504.''
1. On the SAT screen of the primary controller for the G700 media gateway, type change
ip-network-region <network_region>
where <network_region> is the region you will assign to the G700 media gateway. This
region number may or may not match the network region of the S8500 or S8700 CLAN
boards.
The system displays the IP Network Region screen.
IP Network Region Screen
change ip-network-region 1
Region: 1
Location:
Name:
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3028
DiffServ/TOS PARAMETERS
Call Control PHB Value: 34
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
2. Complete the fields as described in ''Administration for Network Connectivity for Avaya
Communication Manager, 555-233-504.''
168 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
Home Domain:
Audio PHB Value: 46
Audio 802.1p Priority: 6
Keep-Alive Count: 5
IP NETWORK REGION
Intra-region IP-IP Direct Audio: yes
Inter-region IP-IP Direct Audio: yes
IP Audio Hairpinning? y
RTCP Reporting Enabled? n
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
AUDIO RESOURCE RESERVATION PARAMETERS
Page 1 of 19
RSVP Enabled? n