Administering An S8500 Or S8700/S8710 Primary Controller - Avaya g700 Installation And Upgrades

Manual installation of a new G700 without an S8300
LSP Screen
change lsp
Number NAME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2. Enter the node name for each LSP supported by the primary controller and submit the form.
Skip to Administering the Media Gateway

Administering an S8500 or S8700/S8710 primary controller

Complete the procedures in this section if the primary controller for the G700 you are installing
is an S8500, S8700 or S8710. If the primary controller is an S8300, you should have completed
the procedures in
This document covers only the administration of Communication Manager required for the
G700 media gateway to communicate with the primary controller over a customer's network.
For the majority of required administration, see Administrator Guide to Avaya Communication
Manager, 03-300509, or Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504.
In this section, you will use the SAT interface on the primary controller to:
Assigning Node Names and IP Addresses for the C-LANs and LSPs
●
Administering Network Regions
●
Assigning LSPs to the Network Regions
●
550 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
LOCAL SURVIVABLE PROCESSOR
IP Address
node-10-LSP_ 192.168.1.50
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
____________
Administering an S8300 primary controller
Service
State?
in-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
out-of-service
on page 557 to continue.
on page 545.
Page 1 of 16
Translations
Updated
14:21 5/4/2003