Testing Connectivity Through The Iolan - Avaya g700 Installation And Upgrades

Telephones and adjunct systems
Host: leave blank or enter S8300 Media Server IP Address
●
Remote Port: 0
●
Local Port: must match the value of Remote Port on the IP Services screen of the
●
Communication Manager software
6. Press ENTER and select Save & Exit to effect the changes.
7. Press ENTER again to view the Administration Menu.
8. Select kill to disable the port connection.
9. Repeat the steps for each additional port you want to administer.
10. When administration is complete, from the Connections Menu, select logout (or press
Ctrl D).
11. Close HyperTerminal.
At this point, you have established a connection path from the adjunct through the IOLAN+ to
the S8300 Media Server.

Testing connectivity through the IOLAN+

To test connectivity through the IOLAN+
1. On the system management terminal, press ENTER to get the login prompt to the
Communication Manager switch.
Note:
If you get garbled text, check the baud rate setting on the Port Setup Menu. You
Note:
can adjust it up or down.
2. If no login prompt appears, log back into the IOLAN+ through HyperTerminal.
3. Select Admin mode > stats and press ENTER twice.
4. Select users and press ENTER.
386 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server