Connecting The 1151B1 Or 1151B2 Power Supplies; Avaya Power Over Ethernet (Poe) Switches; Available Poe Switch Options - Avaya g700 Installation And Upgrades

Connecting the 1151B1 or 1151B2 power supplies

The 1151B1 is a standard (no battery backup) power supply unit. The 1151B2 is a battery
backup version of the 1151B1. Either power supply can support one telephone with or without
an adjunct. The maximum loop range is 250 feet (76 meters). Two modular jacks are used.
Power is provided on the PHONE jack, pins 7 and 8 (- and +, respectively).
The PHONE and LINE jacks are 8-pin female non-keyed 657-type jacks that can accept D4, D6,
and D8 modular plug cables. See
Figure 25: 1151B2 Power Supply — Front

Avaya Power over Ethernet (PoE) switches

Available PoE Switch Options

Data and power are combined in a (PoE) switch and sent over a single cable, thus simplifying
power management and cabling infrastructure and saving rack space.
Avaya offers the following PoE switches:
C360 Converged Stackable Switches (C363T-PWR and C364T-PWR)
●
C460 Converged Multilayer Switch
●
P333T-PWR PoE Switch
●
Installation and wiring of telephones and power supplies
Figure 25: 1151B2 Power Supply — Front
pwr_sup1 CJL 051496
on page 349.
Issue 8.1 June 2005 349