Setting The Media Server's Time; If Using Ia770, Install Messaging Software - Avaya g700 Installation And Upgrades

Media gateway and media server

Hide thumbs Also See for g700:

Table of Contents

Setting the media server's time

To set the media server's time

1. In the main menu under Server, click Set Server Time / Timezone.

The S8300 displays the Set Server Time/Timezone window.

2. Set the media server's time close enough to the NTS's time, date, and time zone that

synchronization can occur (within about 5 minutes).

3. When finished, click on the Configure Server window to continue.

After NTP is enabled, time changes greater than 15 minutes will disrupt the synchronization

with the NTS and NTP will shut down. You need to set the server's clock now so that

synchronization can take place.

4. When finished, click Continue.

If you are using IA770 Integrated Messaging, you must install the messaging software at this

The tasks to accomplish this are:

1. Log in to the S8300 Media Server command line.

2. Stop the system.

3. Auto-install the IA770 messaging software.

4. Restart the system.

5. Enable messaging on the S8300 Media Server Web interface.

For detailed information on performing these tasks, refer to Avaya IA770 INTUITY AUDIX

Messaging, Release 3.0, Installation, Upgrades, and Troubleshooting, 11-300532.

If using IA770, install messaging software

Issue 8.1 June 2005