7. Disconnect the laptop from the SIPI faceplate.
8. Check the LED on the SIPI faceplate. Verify that the display shows the letters I and P and
a filled-in V at the bottom. (See
Figure 5:
SIPI
Figure notes:
1. SIPI has a static IP address
Verifying connectivity to the media server
1. Open the Maintenance Web Interface and log in as craft.
2. Under Diagnostics, click Ping and select All IPSIs, UPS(s) to verify connectivity to these
units.
3. Click Execute Ping.
4. Verify that all endpoints respond correctly.
Installing and Configuring the Avaya S8400 Media Server
LED display for static address
1
2
Verifying connectivity to the media server
Figure
5).
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
2. SIPI has connectivity and an IP address
45
February 2007