Chapter 6: IP interface configuration
Verifying connectivity to the media server
1. Open the Maintenance Web Interface and log in as craft.
2. Under Diagnostics, click Ping and select Other server(s), All IPSIs, UPS(s), Ethernet
switches to verify connectivity to these units.
3. Click Execute Ping.
4. Verify that all endpoints respond correctly.
Verifying that the IPSIs are translated
1. Open a SAT session on the media server.
2. Type list ipserver-interface and press Enter.
3. Verify that all ISPI circuit packs are translated.
Upgrading the IPSI firmware version (if necessary)
You might need to upgrade the firmware on some or all the IPSIs. All IPSIs must have the same
firmware load.
1. On the Maintenance Web Interface under IPSI Firmware Upgrades, click IPSI Version.
2. Select Query All and click View.
3. Verify the firmware release for each IPSI.
4. If an upgrade is required, follow the procedures in Firmware Download Procedures at:
ftp://ftp.avaya.com/incoming/Up1cku9/tsoweb/firmware/TNpackFirmwareDownloadInstructions.pdf
72
Installing and Configuring the Avaya S8500 Media Server
June 2006