Display Functions 1 (Pr. 52 To Pr. 56); Monitor Display/Da1, Da2 Terminal Function Selection (Pr. 52 To Pr. 54, Pr. 158) - Mitsubishi Electric FR-V560 Instruction Manual

Display functions 1 (Pr. 52 to Pr. 56)

4.7 Display functions 1 (Pr. 52 to Pr. 56)
4.7.1 Monitor display/DA1, DA2 terminal function selection
(Pr. 52 to Pr. 54, Pr. 158
During operation, you can select the signals shown on the operation panel (FR-DU04
PU04V) main display screen and on the parameter unit (FR-PU04V) level meter and the signals output to the
DA1 and DA2 terminals.
• There are two analog output DA1 and DA2 terminals.
Select the signals using Pr. 54 and Pr. 158.
Parameter
DU/PU main display data
52
selection
PU level display data
53
selection
DA1 terminal function
54
selection
DA2 terminal function
158
selection
<Setting>
Any of the following signals can be monitored by parameter setting.
The signals marked × cannot be selected for monitoring.
Pr. 52
Signal
Display
Unit
Type
DU LED
×
No display ——
0.1
Speed 0/100
r/min
Output
0.01A 0/100
current
Output
0.1V 0/100
voltage
Alarm
—— 0/100
display
0.1
Set speed 5
r/min
Output 0.01
6
frequency Hz
with
Encoder Encoder
Speed
Name
Parameter Settings
Pr. 53 Pr. 54 Pr. 158
DA1 DA2
PU main PU level terminal terminal
monitor meter 12 bits 12 bits
(±10V) (+10V)
× ×
0
0/100 1 1
0/100 2 2
0/100 3 3
× ×
0/100
*2 5 5
*2 6 6
without with without Condi-
tional PLC
Encoder Encoder
Torque Position
Factory
Setting Range
Setting
0, 5 to 12, 17 to 20, 23, 24,
0 32 to 35, 38, 100
(5 to 12 are invalid for FR-PU04V)
1 0 to 3, 5 to 12, 17, 18
1 to 3, 5 to 12, 17, 18, 21,
1
32 to 34, 36
1 to 3, 5 to 12, 17, 18, 21,
1
32 to 34, 36
Full-Scale Value
of the Level
± Output
Meter Connected
to DA1 and DA2
——
Pr. 55
×
Pr. 56
×
1000V
×
——
×
Pr. 55
The frequency
converted from Pr.
55
110
SSC
)
)/parameter unit (FR-
-1
Remarks
Extended mode
Description
When "0" is set in Pr. 53, the level
meter of the parameter unit is not
displayed.
Vector
control Speed feedback value
with from encoder
encoder
Vector
control Speed estimation
without value
encoder
V/F Speed calculated from
control output frequency
The output current is displayed as
effective value.
The output voltage is displayed as
effective value.
————
Under speed control, the current
speed setting is displayed.
0r/min under position control.
The output frequency is displayed.