Monitoring Reference (Pr. 55, Pr. 56, Pr. 866) - Mitsubishi Electric FR-V560 Instruction Manual

REMARKS
Where to monitor the data set in Pr. 52 varies with the setting.
Factory setting
* The monitor displayed at powering on is the first monitor. To set the first monitor, press
Power-on monitor
(First monitor)
FR-DU04
-1 CONTROL PANEL
r/min
A
V
MON EXT PU
REV FWD
Output speed
monitor
1) Setting is any of "5 to 12" (Displayed in the third monitor position)
First monitor
SET
Output speed monitor
2) Setting is any of "17, 18 and 24" (Displayed instead of output current monitor)
First monitor
SET
Output speed monitor
3) Setting is any of "19, 20, 23, 25" (Displayed instead of output voltage monitor)
First monitor
SET
Output speed monitor
Related parameters
• Speed monitoring reference setting ⇒ Pr. 55 (Refer to page 113.)
• Current monitoring reference setting ⇒ Pr. 56 (Refer to page 113.)
• Torque monitoring reference setting ⇒ Pr. 866 (Refer to page 113.)
• Output filter of terminal DA1 ⇒ Pr. 867 (Refer to page 195.)
4.7.2 Monitoring reference (Pr. 55, Pr. 56, Pr. 866
Set the value that is referenced when the output speed or output current is
selected for the DA1 and DA2 terminals and PU level meter display.
Parameter
55 Speed monitoring reference
56 Current monitoring reference Inverter rated output current
866 Torque monitoring reference
Second monitor
FR-DU04
-1 CONTROL PANEL
r/min
SET
A
V
MON EXT PU
REV FWD
Output current
1)
monitor
2)
Second monitor
SET
Output current monitor
Second monitor
Setting "17, 18, 24" monitor
Second monitor
SET
Output current monitor
Name Factory Setting
113
Display functions 1 (Pr. 52 to Pr. 56)
SET
Third monitor
FR-DU04
With alarm
-1 CONTROL PANEL
r/min
SET
A
V
MON EXT PU
REV FWD
Output voltage
1)
monitor
1) 3)
Third monitor
Setting "5 to 12" monitor
Third monitor
SET
Output voltage monitor
Third monitor
Setting "19, 20, 23, 25" monitor
with without
Encoder Encoder
Speed
Setting Range
1800r/min 0 to 3600r/min
0 to 500A
150% 0 to 400%
for more than 1.5s.
Alarm monitor
FR-DU04
-1 CONTROL PANEL
r/min
SET
A
V
MON EXT PU
REV FWD
SET
with without Condi-
tional PLC SSC
Encoder Encoder
Position
Torque
10VDC (terminal DA1)
10VDC (terminal DA2)
Output
or
display
Pr.55
Pr.56
Pr.866
Remarks
Extended mode
)
4