Installing The System Into The Rack Enclosure; Installation Options - Sun Microsystems Fire 280R Setup And Rackmounting Manual

2
C H A P T E R
Installing the System Into the Rack
Enclosure
This chapter provides step-by-step instructions for rackmounting the server into a
Sun expansion cabinet or other EIA-compliant rack enclosure.
To rackmount a Sun Fire 280R server, complete the following tasks in the order
listed:
"Installation Options" on page 5
"Prepare the Rack Enclosure" on page 9
"Install the Slide Assemblies Into the Rack Enclosure" on page 11
"Install the System Into the Rack Enclosure" on page 13
The Sun Fire 280R Server Rackmounting Overview included with your documentation
set illustrates the rackmounting steps in a convenient, graphical overview. This
chapter provides detailed information about each step.

Installation Options

Many of the options ordered with your system are pre-installed at the factory. For
information about how to install other options, see the Sun Fire 280R Server Service
Manual or contact your qualified service provider. For information about installing
one additional internal disk drive, see the Sun Fire 280R Server Owner's Guide.
5