Table 2-13 Openboot Diagnostics Test Menu Commands - Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual

TABLE 2-13
TABLE 2-13
Command
exit
help
set-default variable
setenv variable value
test-all
test #
test #,#
except #,#
what #,#
48 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
describes the commands you can type from the obdiag> prompt.
OpenBoot Diagnostics Test Menu Commands
Description
Exits OpenBoot Diagnostics tests and returns to the ok prompt
Displays a brief description of each OpenBoot Diagnostics
command and OpenBoot configuration variable
Restores the default value of an OpenBoot configuration
variable
Sets the value for an OpenBoot configuration variable (also
available from the ok prompt)
Tests all devices displayed in the OpenBoot Diagnostics test
menu (also available from the ok prompt)
Tests only the device identified by the menu entry number. (A
similar function is available from the ok prompt. See "From
the ok Prompt: The test and test-all Commands" on
page 19.)
Tests only the devices identified by the menu entry numbers
Tests all devices in the OpenBoot Diagnostics test menu except
those identified by the menu entry numbers
Displays selected properties of the devices identified by the
menu entry numbers. The information provided varies
according to device type