Detection Of The Remaining Roll Paper - Canon imagePROGRAF iPF720 User Manual

Detection of the Remaining Roll Paper

If you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper, the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut off after it has been read.
Note
•
If the document is not cut but kept in the printer, only the text message is printed. This is also the
case when printing on 8-inch rolls or clear lm.
Important
•
If the barcode is not detected when it is advanced, enter the type and length of paper on the Control
Panel.
•
Barcodes are not cut off when Chk Remain.Roll and Trim Edge First are both Off. To have the printer
cut off barcodes automatically, on the Control Panel menu, set Chk Remain.Roll to On. Otherwise cut
off barcodes by using Paper Cutting in the Control Panel menu.
Follow these steps to activate detection of the remaining roll paper.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Media Menu, and then press the ► button.
3.
Press ▲ or ▼ to select Chk Remain.Roll, and then press the ► button.
4.
Press ▲ or ▼ to select the desired setting option, and then press the OK button.
Handling rolls
Handling Paper 119