Setting Telnet/Web Access; Description Telnet/Web Access - Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual

Protection from unauthorized access

6.2 Setting Telnet/Web access

6.2 Setting Telnet/Web access

6.2.1 Description Telnet/Web access

The Telnet server of the Switch allows you to configure the Switch using the
Command Line Interface (in-band). You can switch off the Telnet server to
prevent Telnet access to the Switch.
In the state of delivery, the server is switched on..
After the Telnet server has been switched off, the Switch can no longer be
accessed via a Telnet connection.
Note: The telnet server may be reactivated via the command line interface
(out-of-band) or via the Security:Telnet/Web Access dialog in the
Web-based Interface.
The Web server of the Switch allows you to configure the Switch using the
Web-based interface. You can switch off the Web server to prevent Web
access to the Switch.
In the state of delivery, the server is switched on.
After the web server has been switched off, the Switch can no longer be
accessed via a web connection.
Note: The web server may be reactivated via the command line interface.
Layer 2 Enhanced with Layer 2 Professional
75
Release 1.0 10/05