Security
3.3 Telnet/Web/SSH Access
3.3 Telnet/Web/SSH Access
This dialog allows you to switch off the Telnet server, the Web server and the
SSH server on the device.
Figure 17: Telnet/Web/SSH access dialog
3.3.1 Description of Telnet access
The Telnet server of the device allows you to configure the device by using
the Command Line Interface (in-band). You can deactivate the Telnet server
to prevent Telnet access to the device.
On delivery, the server is activated.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is kept.
RM Web L3P
45
Release 4.1 03/08