Secured Access To Web Configuration - Hirschmann OWL LTE M12 User Manual

Basic Information 1.1 Access to the GUI Configuration
After the green LED illuminates, it is possible to restore the initial settings of
the router by pressing the "Reset" button on the rear panel. If you press the
"Reset" button, the configuration returns to the default settings and the router
reboots (the green LED is on).
1.1.1

Secured access to web configuration

It is possible to access to the GUI interface using the HTTPS protocol. If your
router still has the default IP address configured, enter https://192.168.1.1
into your web browser. When you access the router for the first time, the
router requires you to accept the security certificate. The browser reports a
disagreement in the domain, and an unverified certificate.
To prevent this message, upload a new certificate and key to the router using
the following steps:
 Create a new certificate.
 Generate an new key.
 Enable the SSH function on the router.
 Connect to the router using SSH.
 Replace the file, /etc/certs/https_cert, on the router with your newly
created certificate.
 Replace the file /etc/certs/https_key with your newly generated key.
UM Configuration OWL LTE M12
16
Release 01.2.02 Rev. 01 - 06/2018