Audio Delay submenu
This submenu lets you delay the audio to match the video delay. To enable audio delay,
rotate either Adjust knob to the right until the LCD screen displays
delay, rotate either knob to the left until
Audio Output submenu
From this submenu you can select stereo or dual mono for the audio output type.
•
•
To select the audio type, rotate either adjust knob right to select
Dual Mono
Advanced Configuration Menu
Use the Advanced Configuration menu to enable auto-imaging for one or more selected
inputs, enable or disable auto memories, select the aspect ratio to be displayed for the
current input, set the amount of seconds for RGB delay, select a switch effect, select a test
pattern, view the DVS internal temperature, and initiate a reset of the scaler to factory
defaults.
Figure 18 shows a flow diagram of the Advanced Configuration menu and submenus and
the adjustments that are available from them.
Input Number
Select an input:
Next
1 through
Reset to Factory
Reset to Factory
Press the Detail button to
reset the unit to its
factory default settings.
When finished, system
returns to default cycle.
Figure 18.
In stereo mode, the audio signal from the left channel is output to one speaker while
the signal from the right channel is output to the other speaker.
In dual mono mode, the inputs from the left and right channels are summed together
and are output to the speakers together as two mono channels, so that the left and
right outputs contain the same combined signal information.
. The default is
Stereo
Audio
Configuration
Menu
Advanced
Configuration
Next
Auto Image
Auto Memories
Next
Input # 1 Off
Auto Image
Auto Memories
Enable or disable
Enable or disable auto
10.
Auto-image:
memories:
•
On
•
On (default)
•
Off (default)
•
Off
Internal Temp.
Next
Press Detail
100.40F
Unit Internal
Defaults
Temperature
Current internal
temperature expressed in
degrees Fahrenheit and
Celsius (not adjustable)
Advanced Configuration Menu
Off
is displayed. The default is
.
Config Menu
Aspect Ratio
Next
Fill
On
Aspect Ratio
Select display aspect
ratio:
•
Fill (default)
•
Follow
Test Pattern
Next
38C
Off
Test Pattern
Select a test pattern:
•
Off (default)
•
White Field
•
Color Bars
•
Crop
•
Crosshatch
•
1.33 Aspect
•
4x4 Crosshatch
•
1.78 Aspect
•
Grayscale
•
1.85 Aspect
•
Ramp
•
2.35 Aspect
•
Alternating Pixels
•
Blue Mode
. To disable audio
On
On
.
or left to select
Stereo
RGB Delay
Next
0.5 Seconds
RGB Delay
Select RGB delay in
0.1-second increments.
•
Range: 0.0 through 5.0
•
Default: 0.5
Switch Effect
Next
Fade
Switch Effect
Select the effect displayed
when input is switched:
•
Cut
•
Fade (default)
DVS 510 Series • Operation
Next
29