Yamaha 2006 RX10GTAXW Service Manual page 247

Parts to be tightened
(RX10RTL, RX10RL, RX10RTRL, RX10RSL,
RX10GTL, RXW10L)
Shockabsorber adjuster assembly and frame
Front pivot arm and frame
Front pivot arm and shockabsorber
Front pivot arm and stopper band
Shaft and stopper band
Sliding runner and sliding frame
Suspension wheel and sliding frame
Front pivot arm and control rod
Front pivot arm bracket and sliding frame
Front pivot arm and bracket
Rear pivot arm and shockabsorber
Rear pivot arm bracket and control rod
Rear pivot arm and frame
Shaft and frame
Rear pivot arm and rear pivot arm bracket
Rear pivot arm bracket and sliding frame
Rear axle
(RX10ML)
Front pivot arm and frame
Front pivot arm and front shockabsorber
Front pivot arm and stopper band
Shaft and stopper band
Shaft and sliding frame
Suspension wheel assembly and sliding frame
Front pivot arm and sliding frame
Suspension wheel and sliding frame
Rear pivot arm and sliding frame
Bracket and front shockabsorber
Front pivot arm bracket and bracket
Front pivot arm and bracket
Bracket and rear shockabsorber
Relay rod and rear pivot arm
Rear pivot arm and rear shockabsorber
Rear pivot arm and frame
Suspension wheel and sliding frame
Pivot shaft and sliding frame
Rear axle
Speed sensor
Gear unit (speed sensor)
NOTE:
Tightening steps:
1. Tighten the bolt to a torque at 120 Nm (12.0 m•kg, 85 ft•lb).
2. Loosen the bolt completely.
3. Retighten the bolt to a torque of 60 Nm (6.0 m•kg, 43 ft•lb).
TIGHTENING TORQUE
Tightening torque
Nm m•kg ft•lb
9 0.9 6.5
60 6.0 43
49 4.9 35
4 0.4 2.9
4 0.4 2.9
10 1.0 7.2
60 6.0 43
74 7.4 53
30 3.0 22
72 7.2 52
49 4.9 35
74 7.4 53
84 8.4 61
84 8.4 61
72 7.2 52
72 7.2 52
75 7.5 54
72 7.2 52
49 4.9 35
4 0.4 2.9
4 0.4 2.9
60 6.0 43
60 6.0 43
60 6.0 43
60 6.0 43
72 7.2 52
49 4.9 35
72 7.2 52
72 7.2 52
49 4.9 35
49 4.9 35
49 4.9 35
72 7.2 52
60 6.0 43
72 7.2 52
75 7.5 54
20 2.0 14
40 4.0 29
131
SPEC
Remarks
(RX10RTL, RX10RL,
RX10RTRL, RX10RSL,
RXW10L)
®
Apply LOCTITE
®
Apply LOCTITE
(RXW10L)
®
Apply LOCTITE
®
Apply LOCTITE