Table of Contents
Advertisement
V5. "name"
D1. D
D2. "vfr_comds"
Example {V,1,A,T,"BEAMON"¦
D,"~LV02"¦}
The verifier's configuration packet ID is "1" and named "BEAMON."
The verifier packet is added to the verifier's temporary memory. It uses
Mode 2.
D e f i n i n g t h e V e r i f i e r F i e l d
The verifier field in a format references the verifier configuration packet
ID to use for this particular format. The verifier field allows you to specify
a different verifier configuration packet for each format, regardless of the
format number. See "Defining the Verifier Configuration Packet," for
more information.
Note:
If you do not specify a particular verifier configuration packet, the
last sent verifier configuration packet is used.
Syntax
V,vfrID¦
V1. V
V2. vfrID
Example {F,25,A,R,M,508,508,"Fmt 25"¦
V,3¦
B,1,12,F,110,115,1,2,120,5,L,0¦
...}
Specifies to use verifier configuration packet ID #3 starting with format 25
and used until another verifier configuration packet is sent or specified.
Packet name, 0-8 characters, enclose within
quotation marks. The name you enter here is shown
as a custom configuration on the printer's menu for
MODE. See "Setting the Mode" for more information.
Non-printable text/data field.
Verifier commands. Must be enclosed within
quotation marks. Refer to the SV Series Operator's
Guide for the complete list of verifier commands.
Verifier Field.
Unique number from 1-999 to identify the verifier
configuration packet ID you want to use with this
format.
Using the VCT 4-9
Advertisement
Table of Contents
