Petrol flange assembly removal
Close the tank filler cap.
Turn the tank upside down and remove the nine
screws (1) fastening the flange to the tank and the
three spacers.
Remove the flange assembly (2) from its seat.
To pull out the flange (2) use three M6 screws (1)
removed previously.
Insert the screws (1) into the respective threaded holes.
Screw in sequence until the flange is extracted.
Lift up the flange (1) and disconnect the tubes (2) on
both sides of the flange.
Remove the two CLIC R 96105 fasteners utilising the
specified pincers.
Specified pincers: CLIC R 205
Part code 800095850
Maintenance
1
1
1
- 39 -
1
1
1
2
2
B
1
1