Table of Contents
Advertisement
Unscrew the lower fixing screws of the oil radiator guard,
positioned at the lower base of the water radiator.
Remove the oil radiator guard.
Move the radiators slightly towards the front of the
F
motorcycle, then remove the flange fixing the exhaust
manifolds to the cylinder unit by unscrewing the nut.
During this operation, take care not to touch
the exhaust pipes in order to avoid burns.
Unscrew the compensatory housing fixing screws.
Special tool N. 8000B2051
When reassembling, it is necessary to apply a special
product to the three screws. Lightly screw them in.
Tighten the central screw first and then the other two to
the prescribed torque pressure.
Recommended thread-locking fluid: Loctite
243
Torque pressure: 20 ÷ 22 N•m
Suspension and wheels
- 54 -
20÷22 N•m
Advertisement
Table of Contents
