Suspension and wheels
Swingarm pin removal
Remove the screw (1) on the right side of the motorcy-
cle.
Remove the washer and push out the pin manually.
Support the swingarm so that it does not drop to the
ground.
Now the swingarm can be extracted.
1
Upper chain guide removal
F
Remove the two screws (1) and the relative plates.
Lift up the front part of the chain guide to remove it
from the swingarm (see figure).
1
Repeat the operation on the rear part, where the screw
seat is situated in the swingarm.
- 63 -