Place the dial gauge as shown in the figure, and check
the flatness.
Flatness must not exceed: 0.5 mm.
When effectuating balancing on certain
F
makes of tyres, it is necessary to refer to the
yellow mark (1) present on the side of the tyre
as shown in the figure. It indicates the lighte-
st point of balancing and must be situated
close to the tyre valve when the tyre is moun-
ted onto the wheel rim.
N.B.
On the side:
- Figure A: Brutale 750 S / 910 S / 910 R /
989 R / 1078 RR version
- Figure B: Brutale 750 Oro version
Suspension and wheels
- 80 -
1
A
B
1