Table of Contents
Advertisement
Measure the minimum span between the fan and
radiator pack using a feeler gauge as illustrated in the
diagram.
Perform the measurement several times in the mini-
mum span area around the entire fan.
The minimum distance "d" must be in the following
dimensional range: 1.5 < d < 4.5 mm.
Tighten the three screws (1) to the prescribed coupling
torque.
Cooling fan support screws coupling torque
7-10 Nm
Proceed in a similar manner for the left cooling fan unit.
Fit the left fan unit cable connector to the special plate
on the right fan support.
Cooling system and lubrication system
- 17 -
1
1
L
Advertisement
Table of Contents
