Rocker Arm Assembly Overhaul; Rear Shock Absorber Support Plate Removal - MV Agusta BRUTALE 750 S Workshop Manual

Suspension and wheels

Rocker arm assembly overhaul

1
Remove the anti-dust seal (1).
Check the condition of the roller bearings and if it is
necessary to substitute them, utilise an extractor as
shown in the figure.
Check for eventual axial play of the bolt holes of the
F
connecting rod (2).
Substitute if worn.
2

Rear shock absorber support plate removal

1
Remove the three screws (1) indicated in the figure
and remove the support plate (2).
2
- 40 -