Table of Contents
Advertisement
Check that the oil level is at an "X" value from the
upper edge of the sleeve, including the upper edge as
well.
- BRUTALE 750 ORO / 750 S (MY 03): X = 90 mm
- BRUTALE 750 S (MY 04):
- BRUTALE 910 S:
- BRUTALE 910 R:
- BRUTALE 989 R - 1078 RR:
N.B.: Measurement taken with the inside rod
and the spacer in place.
It is important to respect the quotes indicated.
Ensure that the inside rod has reached the
limit stop.
Manually screw in the locknut until it reaches the end
of the thread.
The locknut has a special assembly direc-
tion. Pay attention to keep the two support
bases facing upwards (see the figure below).
Introduce the spring.
Insert the key on the pump nut (1) slightly pressing
down the spring.
Suspension and wheels
X = 85 mm
X = 85 mm
X = 74 mm
X = 75 mm
- 25 -
F
1
Advertisement
Table of Contents
