Move the radiators slightly towards the front of the
motorcycle, then remove the flange fixing the exhaust
manifolds to the cylinder unit by unscrewing the nut.
During this operation, take care near the discharge
hoses in order to avoid scalding.
Unscrew the compensatory housing fixing screws.
Special tool: code 8000B2051
G
At the time of the assembly, apply the recommended
thread locking adhesive to the threads of the screws
and tighten them at the required torque.
Recommended thread-locking fluid: Loctite 243
Torque pressure: 20 ÷ 22 N•m
Frame
- 34 -