Table of Contents
Advertisement
Multi-function display
10 Speedometer
The speedometer indicates the speed. The value of
the scale can be written in kilometres per hour
B
(k.p.h.) or miles per hour (m.p.h.). The highest
value on the scale is 299 k.p.h. (185 m.p.h.).
11 "SET" button
If pressed, the "SET" button can select the figure of
the display to effectuate adjustments. If pressed
again, the figures are confirmed.
12 Total mileometer "TOTAL"
Indicates the total mileage, from 0 to 99999.9 (kilo-
metres or miles).
Partial tripmeter 1 "TRIP 1"
Indicates partial mileage, from 0 to 9999.9 kilometres
or miles.
Partial tripmeter 2 "TRIP 2"
Indicates partial mileage, from 0 to 9999.9 kilometres or
miles.
Clock
Indicates the time (0 - 24).
13 Thermometer
Indicates the temperature of the engine coolant.
The value can be in centigrade (°C.) or in
Fahrenheit (°F.).
The temperature field goes from 40°C. to 140°C.
(104°F. to 284°F.).:
- under 40°C. (104°F.) the indication does not
appear. Three flashing lines appear which means
that the temperature signal is very low.;
-between 40° and 49° C (104° and 120° F) the
indication flashes wich means that the tempera-
ture is low;
- between 50°C. and 111°C. (122°F. and 232°F.) the
indication is fixed;
- between 112°C. and 140°C. (234°F. and 284°F.)
the indication flashes which means that the tem-
perature is too high.
Attention: if the temperature is over 120° C
(248° F), stop the motorcycle and check the
coolant level and the fan running on the
right side of the radiator. If it is necessary
to top up the coolant, wait for the cooling of
the engine. Do not open the engine coolant
cap when the engine is hot. If the tempera-
ture indicator continues to mark values
higher than 120° C (248° F) even if the level
is correct and the fan works, not proceed
running and contact an authorized assis-
tance centre.
Maintenance
10
11
- 90 -
13
12
Advertisement
Table of Contents
