Put the headlamp on a table in order to perform the fol-
lowing operations.
Remove the back screw of the headlamp.
Remove the front part of the headlamp from its support
shell.
Disconnect the connector of the dipped headlight.
Remove the protection cover.
Release the check spring.
Extract the bulb of the dipped headlight.
Do not touch the glass of the bulb with your
hands. In case of contact clean using a
degreasing product.
Insert the new bulb.
Refasten the check spring.
Place the protection cover again.
Reconnect the connector of the dipped headlight.
Reassemble the front part of the headlamp from its
support shell.
Retighten the back screw.
Reinsert the connector of the headlamp.
Place the headlamp on its support again and retighten
the two side fixing screws, watching to reinsert the reg-
ister in its seat.
Maintenance
- 95 -
B