Table of Contents
Advertisement
Before closing the fluid reservoir, check the condition
of the components.
REAR BRAKE CALIPER SUBSTITUTION
To facilitate the operation, remove the brake pads as
described previously.
Remove the crown wheel as described in chapter F
"SUSPENSIONS AND WHEELS".
Empty the system of brake fluid as described in para-
graph "Substitution and bleeding of the rear brake
H
fluid".
Remove the tubing by unscrewing the union indicated
in the figure.
Be careful of the residue fluid that remains inside the
pincer unit.
Remove the two screws indicated in the figure.
Substitute the caliper.
For reassembly, tighten the two screws to the prescri-
bed torque pressure.
Rear brake caliper screw torque pressure:
18 N•m
Apply Loctite 243
Brakes
18 N•m
- 32 -
Advertisement
Table of Contents
