MV Agusta BRUTALE 750 S Workshop Manual page 32

Hide thumbs Also See for BRUTALE 750 S:

Table of Contents

Remove the exhaust manifolds by turning slightly

towards the right of the vehicle.

In order to facilitate the reassembly of the

manifolds you should place the fixing

flange on the manifolds before these

manifolds are pleced on the engine.

Insert the flange in the manifolds and

then turn it.

Place the flange-manifolds assembly on

the fixing stud, then tighten the check nut

to the torque wrench shown.

Torque wrench of exhaust manifold check

nut: 20÷22 Nm

Loosen the safety clamp and remove it.