FRONT BRAKE DISC REMOVAL REMOVAL
Remove the front wheel from the motorcycle (see
paragraph "Front brake caliper removal").
Remove the front wheel pin utilising two special tools
(see chapter F "Suspensions and wheels").
Special tool 800092872
Place the wheel in a horizontal position on a work
plane and remove the five screws of each disc procee-
ding in a star-like mode for the removal.
Visually check the discs for lines or score marks.
Place the milled side of the brake disc flange on a level
surface with the milled side face down and utilising a
micrometer gauge check that the maximum oscillation
of the disc reached during a rotation of 360° does not
exceed 0,3 mm.
Utilise a micrometer gauge for this check.
If the oscillation is higher than 0.3 mm, sub-
stitute the disc with a new one.
This operation must be carried out on both front discs.
Brakes
- 15 -
H