Table of Contents
Advertisement
Frame
Unscrew and remove the screw fixing the engine earth
cable to the fixing support of the rear brake fluid tank.
Once the wiring has been freed and collected as
shown in the figure, it is possible to remove the rear
sub-frame.
G
Unscrew and remove on both sides the two lower
screws fixing the rear sub-frame to the union plates
taking care to recuperate the nuts.
Unscrew and remove the two upper fixing screws tak-
ing care, in this case also, to support the sub-frame
and recuperate the nuts.
- 25 -
Advertisement
Table of Contents
